SWASIT+ Ventilator

₹899,999.00

Request for demo call : 98100-61827
SWASIT+ is a high performance, versatile ventilator designed for critical care usage. SWASIT+ operates on built-in turbine technology making it suitable for various invasive and non-invasive modalities of ventilation without the need for external compressed air supply.

Category: Ventilators

Description
Reviews (0)

**Technical Specifications**
Modes	PC-CMV, VC-CMV, PACV, VACV, PSIMV + PS, VSIMV + PS, PRVC, PSV with apnea backup, CPAP, BIPAP, APRV, HFNO. NIV and IV in all modes present.
Display	10″ High illuminance LCD touch display.
Delivered Tidal volume*	02/50-2000/2500 ml (as per order).
Pressure control Above PEEP*	0 to 90 cmH₂O (PC + PEEP < 90 cmH₂O).
Pressure support Above PEEP*	0 to 90 cmH₂O (PS < PC; PS + PEEP < 90 cmH₂O).
PEEP*	0 to 45 cmH₂O.
Respiratory rate	2 to 100 bpm.
FiO₂ range	21% to 100 %.
Apnea time (in PSV mode	10 to 45 seconds.
Peak Flow rate	Upto 150 lpm.
Ventilation maneuvers	Inspiratory hold, Expiratory hold, Recruitment maneuver, Sigh maneuver, Suction maneuver, O₂ Boost.
Displayed scalars	Pressure time; flow-time, volume-time graphs.
Displayed loops	Pressure Vs Flow, Pressure Vs Volume, Volume Vs Flow.
Monitored parameters	PEEP, PIP, Vte, Vti, leak volume, FiO₂, P Plateau, exhaled minute volume, spontaneous minute volume, spontaneous mandatory Vti, spontaneous Vti, inspiratory peak flow, expiratory peak flow rate, dynamic compliance, Lung resistance, respiratory rate, respiratory type and phase, I:E flow, RSBI, PTP, P0.1, tracheal pressure.
Alarms	Peak pressure, exhaled tidal volume, PEEP, RR, Power disconnection, low battery, low O₂ supply, system failure, O₂ sensor error, patient disconnected, high leak.
Alarm indication	Visual and audible alarms in compliance with IEC 60601-1-8 requirements.
Electrical data	230 VAC, +/- 15%, 50 Hz, <2 A.
Battery backup	Upto 120 minutes when delivering above 90% FiO₂*.
Alarm history	Upto 250 alarms and graphical trends upto 125 hours.
Oxygen supply	2 bar to 6 bar.
Storage temperature	5°C to 50 °C. 10 % to 95 % relative humidity (Non-condensing).
Operating temperature	0°C to 40°C.

Key Specifications :

Robust high flow turbine for external compressor free
operation.
High versatility and operates on various Invasive and
Non-Invasive modalities.
Deliverable tidal volume range of 02/50-2000/2500 ml (as
per order).
Designed for round the clock, continuous operations.
Reliable FiO₂ delivery independent of demand
parameters.

Key Features :

Tidal Volume 02/50-2000/2500 ml (as per order) and
PEEP 0-45 cmH₂O.
High-Luminance 10-inch LCD color display.
Sturdy construction for rugged handling.
Accurate Oxygen proportioning over the prescribed range
using precision servo flow control valves.
Bleed-less operation for efficient low loss oxygen handling.
Failsafe design incorporating Pressure relief valve and safety
valve to facilitate patient ventilation during fault conditions.
In build sensor technology to avoid additional consumable
external flow and pressure sensor.
Active leak detection and compensation for continuous and
accurate delivery.
High flow Nasal Oxygen.

Additional Accessories :

Patient breathing circuit with test lung.
Ventilator trolley with support arm.
HME, Bacterial and viral filters.

Approvals :

Approved by Government of India Empowerment Committee
for COVID-19 ventilator with essential technical features.
Performance and accuracy tested and validated by NABL
accredited lab as per ISO 80601.
Medical Electrical Equipment Type tested and validated
by TUV Rhineland as per IEC 60601-1.
Clinical Trial & Approvals by Government of India appointed
Hospitals.